150 litre petrol tank with vented cap
Standard fittings included with this tank:
2 1/4″ thread
The tank is molded with a thread. This is used to attach a cap to the tank.
Nylon threaded vented cap and screw on breather.
The vented cap with gauge is manufactured the suit the 2 1/4″ thread. The vented cap is fitted with a breather that screws in and out as desired for optimal air flow.
16mm nylon breather
The breather is manufactured the suit the 3/8″ thread.The barb is designed to suit a 16mm hose.
1 1/4″ brass inserts x 1
This brass inserts is molded into the tank. This is commonly used for the screw in elecronic sender.
3/8″ brass inserts x 2
These brass inserts are molded into the tank. One is commonly used for the fuel pick up, one is for the breather if needed.
Nylon fuel pick up with stainless filter.
The fuel pick up is manufactured with a 3/8″ BSP to be screwed into the brass inserts molded into the tank. The pick up also has a 1/4″
BSP thread, so as a brass tail or a tank fitting can be screwed into it.
A brass tail is supplied with the pick up. The tail fits a 3/8″ hose.
Get a freight quote here